Free 52559.pdf - Indiana

OAQ PROCESS INFORMATION APPLICATION PI-18: Mineral Processing
State Form 52559 (R / 1-07)

INDIANA DEPARTMENT OF ENVIRONMENTAL MANAGEMENT

IDEM ­ Office of Air Quality ­ Permits Branch 100 N. Senate Ave., MC 61-53 Indianapolis, IN 46204-2251 Telephone: (317) 233-0178, or Toll Free: 1-800-451-6027 x30178 (within Indiana) Facsimile Number: (317) 232-6749 www.idem.IN.gov/permits/air/index.html

NOTES:

·

The purpose of this form is to obtain detailed information about non-metallic mineral processes such as sand and gravel processes, stone quarries, stone processing plants, and slag and kish handing plants. Complete one form for each process material, and duplicate this form as necessary for additional process materials. This is a required form. Detailed instructions for this form are available online at

· ·

www.idem.IN.gov/permits/air/apps/instructions/pi18instructions.doc .
All information submitted to IDEM will be made available to the public unless it is submitted under a claim of confidentiality. Claims of confidentiality must be made at the time the information is submitted to IDEM, and must follow the requirements set out in 326 IAC 17.1-4-1. Failure to follow these requirements exactly will result in your information becoming a public record, available for anyone to inspect and photocopy.

PART A: Mineral Process Information Part A identifies the details pertaining to the mineral processing equipment, including conveyors, screens, crushers, etc. 1. Type of Process Material: 2. Equipment / Process Unit 3. Number of Identical Units Non-Metallic Minerals 4. Unit ID 5. Installation Date Metallic Minerals 6. Open / Enclosed?
Open Open Open Open Open Open Enclosed Enclosed Enclosed Enclosed Enclosed Enclosed

7. Maximum Capacity
(tons/hr)

8. Actual Capacity
(tons/hr)

PART B: Dryer Details Part B identifies the details pertaining to the dryer. 9. Dryer Type: 10. Unit ID 11. Installation Date 12. Plate Perforation Diameter / Mesh Size
(inches or mm) Natural Gas Only Other ­ Attach PI-02F Natural Gas Only Other ­ Attach PI-02F Natural Gas Only Other ­ Attach PI-02F Natural Gas Only Other ­ Attach PI-02F

13. Volume Capacity
(ft )
3

14. Heat Capacity
(mmBtu/hr)

15. Fuel Used

Continued on next page

Page 1 of 3

Indiana Department Of Environmental Management Office Of Air Quality State Form 52559 (R / 1-07)

Process Information ­Mineral processes FORM PI-18 Page 2 of 3

PART C: Storage and Handling of Materials Part C identifies the details pertaining to aggregate storage and handling. 16. Material Size & Specification 17. Type of Storage 18. Storage Capacity
(tons) Open Open Enclosed Enclosed Covered Covered

19. Unit ID

20. Installation Date

21. Storage Open or Totally Enclosed/ Covered?

Open

Enclosed

Covered

Open

Enclosed

Covered

PART D: Emission Factors Part D identifies all emission factors used to calculate air emissions from the process units listed on this form. Use the PI-02 forms to provide the applicable information for the dryers. 22. Process Unit
(& ID, if applicable) value units

23. Air Pollutant

24. Emission Factor

25. Source of Emission Factor
(if not using AP-42, include calculations)

PM PM-10 NOX CO Metals Organics Other (specify): Other (specify):

AP-42 AP-42 AP-42 AP-42 AP-42 AP-42 AP-42 AP-42

Other Other Other Other Other Other Other Other

This space was intentionally left blank.

Continued on next page

Indiana Department Of Environmental Management Office Of Air Quality State Form 52559 (R / 1-07)

Process Information ­ Mineral processes FORM PI-18 Page 3 of 3

PART E: Emission Controls and Limitations Part E identifies the control technologies, techniques, and other process limitations corresponding to each process. Use the PI-02 forms to provide the applicable information for the dryers. 26. Add-On Control Technology: Identify all control technologies used for this unit, and attach completed CE-01 (unless "none"). Storage None Baghouse / Fabric Filter ­ Attach CE-02. Cyclone ­ Attach CE-03. Electrostatic Precipitator ­ Attach CE-04. Other (specify):
Attach CE-10.

Handling None Baghouse / Fabric Filter ­ Attach CE-02. Cyclone ­ Attach CE-03. Electrostatic Precipitator ­ Attach CE-04. Other (specify):
Attach CE-10.

27. Control Techniques: Identify all control techniques used for this process. Storage Handling

28. Process Limitations / Additional Information: Identify any acceptable process limitations. Attach additional information if necessary. Storage Handling

PART F: Federal Rule Applicability Part F identifies any federal rules that apply to the process. Use the PI-02 forms to provide the applicable information for the dryers. 29. Is a New Source Performance Standard (NSPS) applicable to this source?
If yes, attach a completed FED-01 for each rule that applies.

Yes

No

40 CFR Part 60, Subpart OOO 40 CFR Part 60, Subpart UUU 40 CFR Part 60, Subpart

Non-Metallic Mineral Processing Plants Calciners and Dryers in Mineral Industries
(Specify)

30. Is a National Emission Standard for Hazardous Air Pollutants (NESHAP) applicable to this source? If yes, attach a completed FED-01 for each rule that applies. 40 CFR Part 61, Subpart 40 CFR Part 63, Subpart
(Specify) (Specify)

Yes

No

31. Non-Applicability Determination: Provide an explanation if the process unit appears subject to a rule (based on the rule title or the source category), but the rule will not apply.